【Rubber processing wet mixer use】

      The Rubber processing wet mixer is a primary processing equipment for natural rubber. It is mainly used to re-crushing and cleaning the rubber blocks after the initial crushing by the crusher. After the processed rubber material enters the pool for washing, it enters the next process.

【Rubber processing wet mixer working principle】

       The main machine of the single-screw squeeze washer/wet mixer consists of a moving knife assembled on the main shaft and three fixed knives assembled on the body. The movable knife is arranged in a spiral shape in the axial direction, and the cutting edge has a certain slope. When the spindle rotates, the rubber material is sheared, squeezed and softened due to the gap between the movable knife and the fixed knife; in the axial direction Under the action of force, the rubber material is crushed by the cutting knife when it is pushed out of the discharge plate. When processing the rubber material, water is injected into the box to clean the rubber material.

Rubber processing wet mixers:

Rubber processing wet mixer brand:

Rubber processing wet mixer model:

Rubber processing wet mixer principle:

Rubber processing wet mixer uses:

Rubber processing wet mixer parameters:

Main features of rubber processing wet mixer

    Wet agitator is one of the main equipments for the primary processing of natural rubber. It is mainly used for re-crushing and cleaning the rubber block after the initial crushing of the crusher. After the treated rubber material enters the pool for washing, it enters the next process.

    The main machine of single screw extruder/wet stirrer is composed of a moving knife assembled on the main shaft and three fixed knives assembled on the body. The moving knife is arranged in a spiral shape in the axial direction, and there is a certain slope on the cutting edge. When the spindle is rotating, because of the clearance between the moving knife and fixed knife, the rubber material is cut, squeezed, soft; Under the action of axial force, the rubber material is cut into pieces by cutting knife when pushed out of the material tray. During the processing of the rubber, water is injected into the box to clean the rubber.